|
|
Post by Ristow on Mar 18, 2014 9:33:40 GMT -6
|
|
|
|
Post by Ristow on Mar 18, 2014 9:37:59 GMT -6
this may not be as tight as i had thought. the 360 is 33" from rear of passenger head,to end of fan clutch. the V10 is 34" from back of passenger head to tip of waterpump pully.  i need to get another inch in the front. i want this stance after it's stuffed under the hood.  |
|
|
|
Post by Ristow on Mar 21, 2014 9:05:06 GMT -6
|
|
|
|
Post by Head coconut on Mar 21, 2014 9:39:07 GMT -6
It's pretty easy to move the radiator forward on these things...
|
|
Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171 
|
Post by Strode on Mar 21, 2014 10:01:51 GMT -6
I'm anxious to see you get going on this. Are you staying with the mechanical fan? (I think it came with mechanical, right? )
Are those 33X10.5 tires?
|
|
|
|
Post by Ristow on Mar 21, 2014 10:15:23 GMT -6
no room for the fan. i am using the dodge radiator,which is huge. gonna hafta be electric fans.
235-85-16's. 32" tall.
|
|
|
|
Post by Ristow on Mar 28, 2014 17:00:15 GMT -6
clean slate.  rough mock up,just hanging between the rails.     the magic line i need to be behind. i still half about .5 to .75 inch i can and will go back with the motor in this pic.  booster and heater box clearance is fine. this is not gonna be as tight as i thought. very encouraging day. |
|
Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171
|
Post by Strode on Mar 28, 2014 17:02:47 GMT -6
Geez, that makes me happy, even. It looks good in there.
|
|
|
|
Post by Addicted on Mar 28, 2014 19:22:56 GMT -6
Looking good!
|
|
|
|
Post by Ristow on Mar 29, 2014 8:52:32 GMT -6
here's with the motor shove all the way back against the firewall. i'll be in between this and the above line reference pic. looks like it'll have plenty of room. whew!  |
|
tad
i can put new wiper blades on...
Posts: 8
|
Post by tad on Mar 29, 2014 16:11:58 GMT -6
Very nice!
|
|
serehill
i can put new wiper blades on...
Who wants a mustache ride?
Posts: 7
|
Post by serehill on Mar 30, 2014 20:48:39 GMT -6
Fits really good. How's the exhaust look on the steering?
|
|
|
|
Post by Ristow on Mar 31, 2014 5:44:10 GMT -6
no prob. lotta room.
|
|
|
|
Post by Ristow on Apr 1, 2014 14:11:52 GMT -6
|
|
|
|
Post by Addicted on Apr 2, 2014 10:38:09 GMT -6
That's a lot of room on the sides.
For a second I thought your truck had one of those lund fiberglass visors on it.
|
|
|
|
Post by Ristow on Apr 2, 2014 15:13:17 GMT -6
threw the clip and radiator on for a look. looks good.   yup,that's my finger in the pic  |
|
|
|
Post by Ristow on Apr 2, 2014 15:14:10 GMT -6
it's gonna be ALL engine under the hood,lol!  |
|
Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171
|
Post by Strode on Apr 2, 2014 15:33:24 GMT -6
 Getting after it, looks good. Go Ristow, Go! |
|
|
|
Post by Ristow on Apr 15, 2014 10:47:58 GMT -6
sigh. union workers....  didn't notice this till after the intake was back on. the injecter bores on the passenger head intake ports were not cast properly. it left chrysler this way. idiots.  here is the drivers side. clean thru holes.  so,i'll be die grinding those after i tear the intake off again..... |
|
|
|
Post by Addicted on Apr 18, 2014 6:47:06 GMT -6
But, but...if it weren't for the unions.....
|
|
|
|
Post by Ristow on Apr 24, 2014 10:30:59 GMT -6
a little work with a carbide bit.....  and i have a clean shot into the port now...   |
|
|
|
Post by Ristow on May 12, 2014 14:48:42 GMT -6
|
|
|
|
Post by Addicted on May 13, 2014 11:34:21 GMT -6
WH would be proud.........if he still came around here.
|
|
Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171
|
Post by Strode on May 13, 2014 12:51:53 GMT -6
i cleaned up the starter. does this look prissy?  I would have liked to see more complimentary colors, something warm and inviting. Orange and black is so last season. |
|
|
|
Post by Ristow on Jun 9, 2014 17:53:05 GMT -6
spiffed up the throttle body. was badly corroded. hey Tony,sealed ball bearing on the shaft on this one.  and check it yo.  |
|
Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171
|
Post by Strode on Nov 8, 2015 19:22:23 GMT -6
Any updates?
|
|
|
|
Post by Ristow on Nov 8, 2015 19:33:44 GMT -6
no. i gotta get it home first. still sitting at the old shop.
|
|
DarkMonohue
Administrator
The reason our kids are ugly, little darlin'
The tenderest of snowflakes, apparently.
Posts: 62
|
Post by DarkMonohue on Nov 15, 2015 11:13:00 GMT -6
So. Any updates?
|
|
|
|
Post by Ristow on Nov 15, 2015 13:39:53 GMT -6
nope
|
|
|
|
Post by Ristow on Nov 29, 2015 17:19:02 GMT -6
its home now at least.
|
|
