Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171 
|
Post by Strode on Sept 16, 2014 7:12:02 GMT -6
I think we've all seen it.
"I can control it. I'm not like them Prissies. I'm just cleaning things up a bit. Just because I'm painting and cleaning, I know when to stop. So I'm putting chrome on, and polishing, so what? Lots of people do that….I'm not like those people….I'm not Prissy!"
|
|
|
|
Post by Ristow on Sept 19, 2014 4:41:22 GMT -6
im not prissy.
|
|
|
|
Post by WH on Oct 11, 2014 13:55:55 GMT -6
 I AM NOT PRISSY!! Stand corrected big boy... Who took an aluminum bumper and stripped the anodizing off of it and polished it?? If this is not "PRISSY" then there is not such thing... LOL LOL LOL!!! |
|
|
|
Post by Ristow on Oct 11, 2014 19:06:09 GMT -6
ok,ok.....maybe a little. that bumper did look pretty dang good.
sigh...this blue paint is beating me. very discouraged. not prissy. sigh...
|
|
Strode
Administrator
A little bit of snide, and a whole *&%$ of snarky
Knee steering down the highway of life
Posts: 171
|
Post by Strode on Oct 11, 2014 20:33:17 GMT -6
Painting is hard. Mentally hard.
|
|
grandwag85
i can put new wiper blades on...
Posts: 1
|
Post by grandwag85 on Oct 11, 2014 21:20:58 GMT -6
My latest prissy mobile  |
|
|
|
Post by Ristow on Oct 12, 2014 9:18:48 GMT -6
i've seen guys on ifsja thinking they were gonna restore worse.
|
|
|
|
Post by Ristow on Oct 12, 2014 9:19:58 GMT -6
my air tanks are gonna be quite weatherprrof with all the paint on them. lol. they are the test beds. the last trial was not so bad after all.
|
|
|
|
Post by WH on Oct 12, 2014 11:29:40 GMT -6
LOL Everyone note this day, Ristow admitted... Now the statement in the signature!!!
Painting is tough, The reducer is a big part of painting, most paints have four or five different reducers that relate to temperature. Check it out.
The air you are using you said is clean. Clean for air tools, or clean for spraying paint? put a dryer at the gun, just in case.
I doubt you are in a paint booth, did you spray water on the floor before you started painting?
Cutting and buffing can save many goofs in painting, ask me how I know... you should cut and buff if you do it like the professionals, within 48 hrs, the paint still needs to be somewhat soft, but this makes it easier to burn through. I had better luck letting it sit for a month, but it was more work, but less chance to burn through.
You will get it, it will be prissy! LOLOL!
|
|
